Instructions

House and balcony plants

  1. First put some soil into the pot/planter.

  2. Add some Geohumus and mix it into the soil.

  3. Put in the plant and fill the planter up with the remaining
    soil.

  4. Finally add lots of water so that Geohumus can start absorbing it.

Trees and bushes

There are different ways to put Geohumus into the soil:

  1. Mix Geohumus into the soil, as before, or
  2. Put Geohumus direct into the planting hole Dig a hole for the plant
    Add the needed amount of Geohumus into the loose soil and mix them both in the hole
  3. Set in the plant
  4. Fill the hole with soil

Garden and cemetery plantings

There are different ways to put Geohumus into the soil:

  1. Mix Geohumus into the soil, as before, or
  2. Put Geohumus direct into the planting hole
    Dig a hole for the plant
    Add the needed amount of Geohumus into the loose soil and mix them both in the hole
    Set in the plant Fill the hole with soil

Lawns and sod

  1. Spread Geohumus evenly over the prepared soil – for larger areas we recommend the use of a fertilizer spreader
  2. It needs to be worked into a layer 10 cm (=4 in.) beneath the surface
  3. Before unrolling the sod, the prepared area should be thoroughly watered and then give it time to soak in
  4. Lay the sod and then pack it down
  5. Water thoroughly